1.
CAESTECKER P., GAVRUŞ A., RAGNEAU E.
Description
of the Lagrangian Ways of Constraints Traversed Since the Part
Towards the Chip - Illustration in the Plan Deviatoric
2.
MARIA NEAGU, MARICICA
DODU;
Study on the Transient Conjugated Heat
Transfer in Developing Laminar Pipe Flow
3.
NICOLAE OANCEA, VIRGIL TEODOR, M. MIHĂLUŢĂ, GABRIELA PARVU
The Modeling of the Generation of Conical
Polyform Surfaces
4.
FRANCISCO JAVIER SANTOS MARTIN, TEODOR VIRGIL
Algorithm for Blank's Minimum Rolling Radius Determination
5.
NICOLAE
OANCEA, CLARA PANAIT, VIRGIL TEODOR
Algorithm for Hypoid Gear Study
6.
OVIDIU D. CIOCAN
Particularities on
Hydrostatic Extrusion Technological Variants
7.
OVIDIU D. CIOCAN
Elements
Specifical To Pressurization (Sealing/ Tightening) in Hydrostatic
Extrusion Processes
8.
MARIA NEAGU
Active Control of
Convection in a Melted Material Layer I. Convection in an Infinite
Fluid Layer
9.
MARIA NEAGU
Active Control of Convection in a Melted Material
Layer II. Convection with a Finite Lower Boundary
10.
CǍTǍLIN FETECǍU,
COSMIN GIURGEA
Equipment
for the Study of Tribological Aspects of Hip Prostheses
11.
VIOREL PĂUNOIU, DUMITRU NICOARĂ
Researches regarding the Forming Limit Curves Using Reduced Scale
Samples
12.
PĂUNOIU, DUMITRU NICOARĂ, ANA MARIA CANTERA LOPEZ, PEDRO ARROYO
HIGUERA
Numerical Simulation of Forming Limit Curves using Reduced Scale
Samples
13.
ŞTEFAN MITU, GABRIEL FRUMUŞANU,
CONSTANTIN STOIAN
The Establishment of Compatibility Domain in
the Case of Kinematics Groups with Two Common Wheels
14.
EUGEN GHIŢĂ
The Theory of Unary Gears
15.
MARIN MOŢOI CRISTESCU
The influence of the geometry of the
lathe tool on the surface condition at the processing of the
polyamide PA 66-GF 30
16.
NICU CǍPǍŢINǍ
Analytical Model of Worm Hob Errors with Continuous Sharpening
